Raw Commands

[Sidetrack 0]

Ok.. I am going to make a Huge post. Lee, Crise, etc.. move this where you need to. But the site is up and I got the commands from that thread. so copy/paste before we risk loosing it again. Since the site has had problems in the past.. link is http://strongdc.berlios.de/forum/viewtopic.php?t=4332

From Ygrek:

[info] Variables witch can be used in Raw or User Commands

List of all Variables witch can be used in StrongDC++ Raw or User Commands

Discovered Variables:

Usage: %[command] ie. %[userNI]

Usable in search window:

fileFN - Filename

Usable in search window and on user Nick:

line:title - Display DialogBox with "title" with edit field. Those what you write in it it will be replaced by this command. ie %[line:Kick_Reason]

*[user/my] - chose one of ie.: myNI, userU4

[user/my]NI - Display nick

[user/my]DE - Display description

[user/my]I4 - Display IP

[user/my]U4 - Display UDP port (not working in my sdc 2.01, 2.02)

[user/my]EM - Display email

[user/my]CO - Display connection type

Variables avaible after fake check("Get user response" and "Check File List"):

userCS - Cheating string (for dc clients defined in: "Settings->Advanced\Fake detector\Clients" in properties of list items)

userCT - Client type

userSS - Size of share in bytes (from MyInfo string)

userSSshort - Formated size of share

userRS - Real size of share (checked by "Check File List" test)

userLS - File list size (not working in my sdc 2.01, 2.02)

userLL - File list size in bytes

userFD - {FileListDisconnects} (Bug: Don't show number of disconetcs)[not work in sdc 2.01, 2.02]

userTO - {ConnectionTimeouts} (Bug: Don't show correct number of timeouts ei. TO=6 it show 3)[not working in sdc 2.01, 2.02]

userTC - Display 1 if "Get user response" is complete

userFC - Display 1 if "Check File List" is complete

userBC - Display 1 if client is bad/fake

userBF - Display 1 if fle list is bad/fake

userST - {Status} [undiscovered]

userTS - Display answer of "Get user response" test

userCM - Comment (for dc clients defined in: "Settings->Advanced\Fake detector\Clients" in properties of list items)

userOP - Display 1 if user is OP

ussrHU - Display 1 if user is hubbot (in NMDC = wrote in chat but it never sent $Hello and $MyInfo)

userBO - Display 1 if user is Bot (user w/o connection type in NMDC)

uuserHI - Display 1 if user is Hidden

userTA - Display user Tag

userVE - Display user client version

userHN - Display number of hubs where user dont have account(reg/vip)

userHR - Display number of hubs where user have account

userHO - Display number of hubs where user have OP account

userSL - Display number of user slots

userRG - Display 1 if user is registered on hub

userAW - Returns whether user has set away status (designed for <a href="http://dcplusplus.sf.net/ADC.htm" target="_blank" class="postlink">ADC only) [ps.User commands not working/display on adc hubs]

From BigMuscle:

i hopefully fixed userRS and userFC. They worked only for the first filelist check.

userAW returns whether user has set away status (designed for ADC only)

BO 1 if user is bot (user w/o connection type in NMDC)

HU 1 if user is hubbot (in NMDC = wrote in chat but it never sent $Hello and $MyInfo)

hope this helps..

[Lee 84]

Best place for it I think. Thanks to everyone who's contributed to this article. :)

[FIL 0]

the list of variables is very useful: someone knows or has discovered other %[] parameters working with raws in sdc++ and apex? if something did, i'd like to know something about if possible. Many thanks also for the list above.

[FIL 0]

About this parameter: %[junkshare]

which is the new syntax of it in apexdc++?

[Noctis 0]

I don't know. But what does this string stand for anyways?

[Aztek 2]

is it possible to have the tth of the file added as a raw thingy

like %[fileTTH]

[Noctis 0]

Aztek, please try %[userAT] in your version, works only with ADL...

[Aztek 2]

that would be exactly what i want, if i get adl to work in the first place ;)

[RadoX 0]

Aztek, please try %[userAT] in your version, works only with ADL...

What´s %[userAT] for

[Noctis 0]

File's THH (supposedly), but only in the beta version.

[snak3y 1]

this list is very useful :shifty:

thank you Sidey :}

[SkyNet 0]

ooo dear i come back and what have thay done , played about with raws (sniff sniff)

so after reading above about 20 times ++++

how on earth do you get a raw cmd to send info to a chatroom

eg:

User: <nick> <ip> is sharing vob files can someone please check them and take the right actions (Thankyou from your handy little file checker)

i could do this with old raws

help please i wont bite

[Zlobomir 3]

Select Chat, and then Search and User Menus.

+report Please check %[userNI] %[userI4] %[userU4] %[userDE] %[userEM] %[userCO] %[userTA] %[userCT] %[userVE] : %[userCS]

If you can add more details, please post back.

HTH

[SkyNet 0]

Select Chat, and then Search and User Menus.

+report Please check %[userNI] %[userI4] %[userU4] %[userDE] %[userEM] %[userCO] %[userTA] %[userCT] %[userVE] : %[userCS]

If you can add more details, please post back.

HTH

works well but what i am after is the report sent auto using the raws not usercmds,

i try and explain a bit better

client picks up say cheat : op client i need to get a auto raw sent to opchat asking ops to check client and give them all the details on the user with the cheat

just a idea i am working on

[Mikey 0]

<%[myNI]> +report %[userNI] is sharing forbidden files containing: %[userCS]|

Give this a shot almost all Hub Softwares and Scripts support the report function. In fact its an OP report your looking for cause if you were informing a user then you could use the !inform command. I used this raw at one point investigating a constant fake share issue in a hub.

[SkyNet 0]

<%[myNI]> +report %[userNI] is sharing forbidden files containing: %[userCS]|

Give this a shot almost all Hub Softwares and Scripts support the report function. In fact its an OP report your looking for cause if you were informing a user then you could use the !inform command. I used this raw at one point investigating a constant fake share issue in a hub.

you a star cheers m8ty

[GAGA 0]

Hey

Is There a way to use these commands say for e.g %[myNI] or %[userNI] in my away message !!

[Noctis 0]

Not sure about that, my guess would be no, but never tried. Only way to find out is to try it yourself.

[GAGA 0]

Not sure about that, my guess would be no, but never tried. Only way to find out is to try it yourself.

Err i din ask if its possible. . . i asked is there a way. . . coz by normal means its not possible. . but if there are any extended commands

[Zlobomir 3]

Why not possible? Just write out the command in your Away message field...

[GAGA 0]

Why not possible? Just write out the command in your Away message field...

Hey bro

is it possible for you to give me a syntax which would display in my pm for eg , "I am taking a shower. By the way (user nick) you Smell ! you need to take one too! "

the only things that work are (+me = my nick) (and timestamps) .i want a command for user nick and alike

Please post me i'll shall try it out

Thankx

[Lizard 1]

Hello peeps,

btw, %[adlFile] is what I was looking for, all the time, it gives the filename when kicking

[GAGA 0]

has someone got around a way to my need

[BrotherBear 0]

Hi!

How do I send info to OpChat with this Raw Command in Settings/Advance/User Commands?

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being TimeBanned for 2h because: TEST|<%[myNI]> !tban %[userNI] %[line:Time] TEST|

Running ApexDC++ 1.1.0

Thanks in Advance!

Regards,

BrotherBear

[en_dator 1]

something like this should probably do it, not tested so it might need another tweak to make it what you want

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being TimeBanned for 2h because: TEST|<%[myNI]> !tban %[userNI] %[line:Time] TEST|$To: 'you opchat nick here' From: %[myNI] $<%[myNI]> %[userNI] are being TimeBanned for 2h because: TEST|