Raw Commands

[bigcanuck 0]

Hi there as an OP of Uvic's Hub I was wondering just how these Raw commands work, as I can't seem to find any good tutorials on how to use them. Do you know anywhere I could get guidelines to this?

[Lee 84]

http://strongdc.berlios.de/forum/viewtopic.php?t=4332

Does this help? :D

[bigcanuck 0]

http://strongdc.berlios.de/forum/viewtopic.php?t=4332

Does this help?

Yes it does Thank you I've been searching around the net in my spare time (turns out between programming project in University, soccer and other things there isn't much)

[baba.runner 0]

Hi

Do you also have an other Link, as this one does not work anymore? :)

[Crise 26]

Hi

Do you also have an other Link, as this one does not work anymore?

No unfortunately we don't, to my amazement i noticed SDC forums gone today...

[Lee 84]

No unfortunately we don't, to my amazement i noticed SDC forums gone today...

It'll be berlios playing up again. :)

[Crise 26]

It'll be berlios playing up again.

Lee sometime ago there was phpBB2 installation screen there and now the entire directory is deleted... if berlios is playing then they have to have some major problems.

Edit: Just ventured into berlios shell server with my account and looks like someone is doing something to this matter... as the directory isn't deleted just renamed.

[Ð.Sp!dér 0]

404 Not Found

Could YOU explain what they're there for ? What about those new ones on the Misc page ?

Were those explained somewhere in this wonderful forum ? Link me ! Pls.

Thanks. Merry Christmas !

[Crise 26]

404 Not Found

Could YOU explain what they're there for ? What about those new ones on the Misc page ?

Were those explained somewhere in this wonderful forum ? Link me ! Pls.

Thanks. Merry Christmas !

regarding the ones on the misc page, you ought to read the changelog :)

[Metaphase 0]

I have a quick question about using RAW commands in ApexDC. For some reason, no matter what RAW I use, the %[cheatingdescription] always seems to be ignored. :S This is becoming annoying as users are constantly quizzing me as to why they have been kicked. Here are a couple that I use...

<%[mynick]> !kick %[nick] %[cheatingdescription]|


$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> !kick %[nick] %[cheatingdescription]|

[Crise 26]

%[userCS] should give you what you want in ApexDC++ :)

[Tazzie 0]

damn i just installed Apex today and trying to work with raw cmd's and adlsearch.

noticed the link doesnt work anymore.

can someone help me with new link or some info what things changed in raw cmd's?

i know mynick = myNI

guess nick would be NI now.

clientdescription = cd

clienttype = ct

but still my raw cmd wont work.

thnx in advance

[Crise 26]

damn i just installed Apex today and trying to work with raw cmd's.

noticed the link doesnt work anymore.

can someone help me with new link or some info what things changed in raw cmd's?

i know mynick = myNI

guess nick would be NI now.

clientdescription = cd

clienttype = ct

but still my raw cmd wont work.

thnx in advance

nick is userNI

clienttype is userCT

clientdescription would probably be userCM

some of the old macros should still work in certain places however, but ofcourse it's better to use the new ones instead...

[Tazzie 0]

nick is userNI

clienttype is userCT

clientdescription would probably be userCM

some of the old macros should still work in certain places however, but ofcourse it's better to use the new ones instead...

thnx Crise, will try them right away.

So far Apex seems nice solution for my old DCDM.

[Tazzie 0]

raw command working but it doesnt show reason why user got kicked.

user got kicked for incomplete file in share, showed correct in main but when kicking it said no reason given!

this is the line i use

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being kicked because: %[userCT] %[userCM]|<%[myNI]> is kicking %[userNI] because: %[userCT] %[userCM]|<%[myNI]> !kick %[userNI] %[userCT] %[userCM]|

am i missing something?

greetz from a proud Apexuser

[Metaphase 0]

Thanks Crise. I will give it a try.

Tazzie. Try this mate...

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being kicked because: %[userCT] %[userCS]|<%[myNI]> is kicking %[userNI] because: %[userCT] - %[userCS]|<%[myNI]> !kick %[userNI] %[userCT] %[userCS]|

Also, here are a few different ones...

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being kicked because: %[userCS]|<%[myNI]> is kicking %[userNI] because: %[userCS]|<%[myNI]> !kick %[userNI] %[userCS]|		 <---  Kick


$To: %[userNI] From: %[myNI] $<%[myNI]> You are being banned because: %[userCS]|<%[myNI]> is banning %[userNI] because: %[userCS]|<%[myNI]> !ban %[userNI] %[userCS]|		  <---  Ban


$To: -OpChat- From: %[myNI] $<%[myNI]> Can some-one please double check the User %[userNI] becasue %[userCS]|	 <--- Sends PM to -OpChat- about users cheating description.


$To: %[myNI] From: %[myNI] $<%[myNI]> The user %[userNI] has been found cheating because: %[userCS]|	 <--- Sends PM to yourself about users cheating description.

I hope these work ok.

[Tazzie 0]

thnx Metaphase

will try them.

[miago 0]

Hi U all.

I really would appriciate some help from U.

I've tried all the above commands, but I can't get the kick (I use tempban instead) to work properly for me. It doesnt show reason, nor in mainchat or in pm to opchat or in the pm to the user but it tempbans user.

The "doublecheck the filelist" command to opchat works fine.

Here are the commands that I have for the moment and what they do:

Check users filelist, that works

Rawcommand:

$To: -OpChat- From: %[mynick] $<%[mynick]> <%[userNI]> ----> doublecheck the filelist %[userCT] - %[userCS]|

What happens:

OPchat: <-[ZZZ]-check> <[ZZZ]nick> ----> doublecheck the filelist - Shared forbidden file : RAR.txt

Tempban user for forbiddenfiles, that doesn't work

Rawcommand:

$To: %[nick] From: %[mynick] $<%[mynick]> You are being tempbanned for 1h because: %[userCT] %[userCS]|$To: -OpChat- From: %[mynick] $<%[mynick]> <%[nick]> ----> is being tempbanned 1h because of %[userCT] %[userCS]|<%[mynick]> !tempban %[nick] 1h %[userCT] %[userCS]|

What happens:

Main: *** [ZZZ]nick with IP XXX.XXX.XXX.XXX has been temp banned by -[ZZZ]-check to: 1 hour because: No reason specified..

OPchat: <-[ZZZ]-check> <[ZZZ]nick> ----> is being tempbanned 1h because of -

User: ......1h because of -

Can someone please give me some hints on what I'm doing wrong?

Sincerly

Miago

[RadoX 0]

Rawcommand:

$To: %[nick]From: %[mynick] $<%[mynick]> You are being tempbanned for 1h because: %[userCT] %[userCS]|$To: -OpChat- From: %[mynick] $<%[mynick]> <%[nick]> ----> is being tempbanned 1h because of %[userCT] %[userCS]|<%[mynick]> !tempban %[nick] 1h %[userCT] %[userCS]|

In verlihub

$To: %[userNI]From: %[myNI] $<%[myNI]> You are being tempbanned for 2h because: %[userCT] %[userCS]|$To: -OpChat- From: %[myNI] $<%[myNI]> <%[userNI]> ----> is being banned for 2h because of %[userCT] %[userCS]_BAN_2h|<%[myNI]> !kick %[userNI] %[userCT] %[userCS]|

Edited January 21, 2007 by RadoX

[miago 0]

In verlihub

Ths RadoX

Tried that rawcommand too even though I'm running a ptokax hub.

The thing that happend was this:

[17:13:53] *** User [ZZZ]nick - Shared forbidden file : RAR.txt

[17:13:54] *** Connection closed

It showed in main that user had forbidden file, user stayed in hub and I got disconnected with the apexclient, so it doesn't work =D

But thanks anyway...better try something then nothing

//miago

[RadoX 0]

Try

$To: %[userNI]From: %[myNI] $<%[myNI]> You are being tempbanned for 2h because: %[userCT] %[userCS]|$To: %[myNI] From: %[myNI] $<%[myNI]> <%[userNI]> ----> is being banned for 2h because of %[userCT] %[userCS]|<%[myNI]> !kick %[userNI] %[userCT] %[userCS]|

or

$To: %[userNI]From: %[myNI] $<%[myNI]> You are being tempbanned for 2h because: %[userCT] %[userCS]|$To: %[opchat] From: %[myNI] $<%[myNI]> <%[userNI]> ----> is being banned for 2h because of %[userCT] %[userCS]|<%[myNI]> !kick %[userNI] %[userCT] %[userCS]|

The reason you get disconnected is this $To: -OpChat-

Not sure if you can use it, maybe Crise knows.

[miago 0]

Try

The reason you get disconnected is this $To: -OpChat-

Not sure if you can use it, maybe Crise knows.

I got disconnected trying the commands you wrote that is used in verlihub.

Tempban user for forbiddenfiles, that doesn't work

Rawcommand:

$To: %[nick]From: %[mynick] $<%[mynick]> You are being tempbanned for 1h because: %[userCT] %[userCS]|$To: -OpChat- From: %[mynick] $<%[mynick]> <%[nick]> ----> is being tempbanned 1h because of %[userCT] %[userCS]|<%[mynick]> !tempban %[nick] 1h %[userCT] %[userCS]|

What happens:

Main: *** [ZZZ]nick with IP XXX.XXX.XXX.XXX has been temp banned by -[ZZZ]-check to: 1 hour because: No reason specified..

OPchat: <-[ZZZ]-check> <[ZZZ]nick> ----> is being tempbanned 1h because of -

User: ......1h because of -

The command above "works", the only thing is that the "reason" doesn't appear anywhere, thats the thing I would like to work..maybe I wasn't clear earlier *sry*....

Thx again

[Zlobomir 3]

I am not good at this, but IMHO [myNI] is causing the trouble. Since the command works syntax is right, and [myNI] is the only thing pointing to you.

[RadoX 0]

Well that depends if you wrote something in that cheat description, for ex. If you are kicking for a client go to settings and clients, pick a client that is banned and config it to have a cheating description and pick a raw command for it.

What are you kicking for?

small error fix

$To: %[userNI] From: %[myNI] $<%[myNI]> You are being tempbanned for 2h because: %[userCT] %[userCS]|$To: %[myNI] From: %[myNI] $<%[myNI]> <%[userNI]> ----> is being banned for 2h because of %[userCT] %[userCS]|<%[myNI]> !kick %[userNI] %[userCT] %[userCS]|

Edited January 21, 2007 by RadoX

[miago 0]

Well that depends if you wrote something in that cheat description, for ex. If you are kicking for a client go to settings and clients, pick a client that is banned and config it to have a cheating description and pick a raw command for it.

What are you kicking for?

I'm using ADL-search for forbidden files, like porn or rasistmusic or exe files and so on...and on each adl-search-string in properties I point to action raw1 or raw2. (the rawcommands are put in favoritehub properties on raw1 and raw2)

Raw1 is the command just sending a pm to opchat that we have to doublecheck the user filelist, and that one works. (see the first post I made here for the command line and what happens)

Raw2 should be the command that tempbans user and send them a pm and send a pm to opchat about it, that one "works" for the tempban and pm to user and opchat, BUT, the pm doesn't contain the reason why.(same here, see the first post)

I can't figure out why it (as I understand userCS and userCT) works in raw1 but not in raw2.

Hope you understand what I'm asking for....

Thank you for your help