-
Content count
153 -
Joined
-
Last visited
Posts posted by baba.runner
-
-
There is a just alittle issue with the Toolbars.
When the "Lock Toolbars" is checked, then the normal toolbar is locked but not the Mediaplayer toolbar.
And when the "Lock Toolbars" is not checked, then the normal toolbar is not locked but the Mediaplayer toolbar is.
Just wanted to let you know.
-
Hi all
I got this RTE error message, but ApexDC was still running and when I closed the RTE message box ApexDC closed. I was only in 2hubs and downloading only from 2 sources and 2 uploads run also. One of these uploads started all always again. Unfortunately I can not tell you anymore what has been uploaded how many times as the Upload log was not saved.
Let me know what I can give of information! Is the exceptioninfo usefull for you? Let me know and I post it.
Cheers
baba.runner
-
-
I voted no on both, as I think that both do belong to the hub part and not to the client part of DC.
A Hubowner does not necessarily want that "normal" user can post things on his hub without his acknowledgement.
For the RSS-feed, there are other possibilities to have that information. It would be OK if the Feeds were only in relation to APEXDC++ and only visible for the user of the client. And those information are already available here.
-
as this has been discussed alot both here and on other forums, I only have one question here, and that is to the ones having this TTH issue.Do you have multi source disabled? (in settings / downloads / queue)
Yes, I have it disabled!
-
No, doesn`t work I searched on the web but the step by step help they offered didn`t do.Could you please tell me how to do it cause I cant download anything and it`s frustratingtry this site and learn.http://portforward.com/
-
Hi, i am using apex dc for some time now but i bought a new PC, and when I search it doesnt display any results .It shows the filtered things in teh corner but i can`t see anything no mather of the hub/hubs i am on.Can somebody help me ? If it`s about the antivirus i use a daily updated Kaspersky.Thanks :thumbsup:should be something with your Firewall and your ports!
Have you tried to search in passive mode?
-
i don't think my internet connection can go past 11.2 mb/s.Settings
Enable Multi-Source: Disabled
Manual Settings of Number of segments: 1 (u just type it, don't use the arrows)
Just now i clicked to download from a specific user, but because of this Multi-user BS, it downloaded from some1 else in that grouped list. I'm bothered with the fact that it queues every1 on that group, i just want to queue what i want.
There are two other settings you should turn off.
In the settings -> Downloads -> Queue: uncheck "Automatically search for alternative TTH source every XX minutes"
and also uncheck "Automatically match queue for auto search hits"
-
How do i /rebuild or re-hash?I have the same problem.
just type /rebuild in the Mainchat
-
Just one question.
Does the rehash or the rebuild also consider the temp files, the *.dctmp files?
As it are those files whoa re having this tth inconsistency.
btw: I am not able to reproduce this with the new build .475. and when I change back to 1.1.0 again , I have directly the TTH inconsistency.
-
-
All users where asked to rehash when BM updated the TTH code, if you choose not to, well thats your choice.But you cannot say that users should not be forced to rehash, if BM didn't fix the buggy TTH code people would complain that its buggy.
Sometimes you cant win.... :S
I did not say that I did not rehash my share, neither i did confirm that I did
But the TTH inconsistency is what the client is showing us in the download area. This does not mean that the TTH code is buggy.
Please try it out yourself. download a big file from an other user and when you started downloading it, make simply a reconnect in that Hub (make sure that the download is interrupted) and tell us if you get a TTH inconsitency notification when your client tries to continue the download.
Thx in advance.
-
But that is no solution you proposed. It is a workaround, yes.
You can not force all user to rehash everytime the user from which you download, is making a reconnect.
-
Sure, what happens is that quite a few of our users that are on apex have been having problems with a tth inconsistency...The file hangs during a transfer and won't completely download.At first I thought it may have been just me, as I have a unstable ISP at times, and I thought maybe it was corrupting the transfer, but this morning I started seeing a lot of complaint's from our users. Most were trying out other clients to complete a transfer.
That is about all I can pass on to you about the whole thing. I have worked around it now for sometime by deleting the file from the download queue and then downloading it fresh into a separate folder. The files check out ok, so it is not the files them self. It appears to be a bug in the client .
I have deleted my hash files though and am starting over with a clean hash, so will let ya know if that takes care of it....Pain in the butt to have to rehash a TB or two, but it may take care of it.
More later...lol
I can confirm this behavior with TTH inconsistency.
When a download is going and the user from who you are downloading disconnect and reconnects afterwards, the file could not been completed as the error due to TTH inconsistency appears on that file. The only way to finish this file is to delete it and to start it again. The search for alternatives doesn't help neither. It will find other users but the TTH inconsistency is not resolved.
-
Hallo Fabio1962
Peerguardian ist in ApexDC++ Settings enthalten. Du must est da nur anhacken und die IP-Adressen die du sperren willst da einfügen.
Sorry heist da nicht mehr Peerguardian sondern IPGuard
Viel Spass mit ApexDC++
-
Type /help. You'll get a list.But you get not all available commands with /help
i.ex. the /stats is not mentioned there
It would begreat to have them once all together.
-
Hi all
On the PtokaX Forum I got an explanation about this behaviour.
It seems that it is a problem that is very rare, but can happen. And it is due to the fact that the way I configured my hub an in combination to the script and the Client , there are too many informations and the zip file that is created from the Ptokax to be send to the client is to big or corrupted.
For more information please follow this link >>CLICK HERE<<
KR
baba.runner
-
Does it happen in other hubs?Unfortunately not
I also talked allready to Rincewind as I use only his Grimoire and he confirmed me that it is not from the Script. I tried also the reconnect in other hubs with PX 0.4.0.0 with the same Script. There the problem does not appear.
So I thought to post first here , as it does not happen with other Clients.
I will test further. perhaps with a bit of chance I can find something more informativ to give you.
KR
baba.runner
PS. I will also post now in PtokaX Forum. Perhaps PPK knows something about this behaviour.
-
Thx all
I really do not know from where the problem comes
in other PX hubs it works fine
so is it due to a relation of Hub Client and Scripts, I really do not know
I just know that it does not happen when using another Client
I tested it with a frien who has the same problem.
-
Hi all
Does somebody know what this message means?
[17/04/2008 - 21:18:40] *** Connecting to XXXXXXXXXXXX...[17/04/2008 - 21:18:40] *** Connected
[17/04/2008 - 21:18:41] *** Stored password sent...
[17/04/2008 - 21:18:41] <
-
Hey Hey
That are really good news.
Finally someone take the challenge.
Great work m8. Keep going on ;)
-
Hi all
I also have this problem with the smileys.
But the one that has this problem too, please check if in your Rightclicks on userlist for example , if you have the first line, cause I do not have it.
The problem started when I began using the Beta5 downloaded from the Download section of the Apex site. Before I used the previous beta release we got as subscribers and always only updated them with the latest BIN files and not hte installer.
Perhaps this helps to find the way to solve or recreate this issue.
KR
baba.runner
-
Nice idea. Also a backup of old ApexDC++ will be good, in the case where the update fails. So the user can make a manual roll-back.
-
:crying: Hallo . Ich brauche euere Hilfe. Das Problem sind 0 MB User welche bei mirsaugen wollen. Wie kann ich das verhindern. Bisher kenne ich nur die Möglichkeit
die Filme aus dem Share zu entfernen. Da ich gerne Filme tausche habe ich dadurch
kaum Filme mehr in Freigabe. Kennt IHR vielleicht eine andere Möglichkeit, damit ich wieder meine gesamten Filme in den Share stellen kann. Vielen Dank für EUERE Hilfe.
Hallo OmaDuck
Leider kann man da nichts machen im Client. Das ist nur im Hub script möglich. Ich habe deine PM bekommen, konnte dir aber leider bis jetzt noch nicht zurückschreiben.
m.f.G.
baba.runner
Released: ApexDC++ 1.3.4
in News
Posted
Great work Thx.
Got just this little error after install.