Unable to login

[mjall 0]

Hi there,

I am currently running a hub of my own and when my users try to login using ApexDC++ they get this kind of an error, can you please advise how to fix this and is it from my pc, or from theirs.

[17:41:27] *** Connecting to mjackson.no-ip.info...

[17:41:32] *** Connected

[17:41:34] <MJDB You're disconnected - Reason: Using a not allowed client, please download a regular DCPlusPlus client at http://dcplusplus.sourceforge.net - For more details goto http://blablabla.no-ip.org

[17:41:34] *** Connection closed

[Mikey 0]

Hi there,

I am currently running a hub of my own and when my users try to login using ApexDC++ they get this kind of an error, can you please advise how to fix this and is it from my pc, or from theirs.

[17:41:27] *** Connecting to mjackson.no-ip.info...

[17:41:32] *** Connected

[17:41:34] <MJDB You're disconnected - Reason: Using a not allowed client, please download a regular DCPlusPlus client at http://dcplusplus.sourceforge.net - For more details goto http://blablabla.no-ip.org

[17:41:34] *** Connection closed

Are you connecting to it by auto connect? If so Apex sets emulation and will kick u on that. Try adding the hub to favorites and then connecting. Also to that looks to me like a hub issue and not a client issue. At first glance that looks like its a Ptokax setup. If I am right go to the "Options" tab in the Ptokax GUI and check mark the setting in the left hand column that says "Accept tag from unknown" This will remedy the problem completely.

Edited January 8, 2008 by Mikey

[mjall 0]

thanx for the reply, yes i am using Ptokax GUI however i am unable to find that option, i am using an old Ptokax v3.5.1, not the latest v3.6 and therefore is it an option in the latest version. Much appreciated.

[Mikey 0]

thanx for the reply, yes i am using Ptokax GUI however i am unable to find that option, i am using an old Ptokax v3.5.1, not the latest v3.6 and therefore is it an option in the latest version. Much appreciated.

Well it can be done in that version to. If you updated to v3.5.2 you will have that option and even v3.6.0 is a stable version. I think if you want to remedy your issue you will do the simple GUI upgrade and do a checkmark. That will be the fastest way to remedy the issue as v3.5.1 was a bit more resource heavy anyhow.

[mjall 0]

thanx i have upgraded the the software and it worked very well :)

[Mikey 0]

thanx i have upgraded the the software and it worked very well

Good Job! Your Welcome. :)